Difference between revisions of "Micro Hydro Turbine"

From Woodland Harvest Wiki
Jump to navigation Jump to search

Line 13: Line 13:
 
http://www.jencin.com/Fixing.htm
 
http://www.jencin.com/Fixing.htm
  
 +
## How to flash the hydro generator
 +
 +
Plug in an electric drill into the generator receptacle.
 +
 +
If the drill is reversible, move the direction switch to the forward position.
 +
 +
Start the generator.
 +
 +
While depressing the trigger on the drill, spin the drill chuck in reverse direction. This will excite the field and the generator will now produce electricity. If spinning the chuck one direction does not work, try spinning the chuck in the other direction as you may have the reverse switch positioned backward. (http://www.jencin.com/Fixing.htm)
  
 
# References
 
# References

Revision as of 23:59, 24 November 2020

The Micro Hydro Turbine system outputs around 60-110 W all day long. We currently don't have any accurate information on its original efficiency, head, or other characteristics. Please update this section and the micro-hydro page if you know more.

Maintenance

You have to flash the magnetic field of the generator if it looses its magnetic field. Residual magnetism in the generator exciter field allows the generator to build up voltage during start-up. This magnetism is sometimes lost due to shelf time or improper operation, among other reasons. Restoring this residual magnetism is possible and is sometimes referred to as "flashing the exciter field". 1

Furthermore, we could get a flashing module to automatically flash the generator. Another option is to use a drill to excite the magnetic field again.2

https://www.hunker.com/13403116/how-to-flash-the-field-of-a-brushless-generator

http://www.dieselduck.info/machine/03%20electricity/flashing_generator.htm

http://www.jencin.com/Fixing.htm

How to flash the hydro generator

Plug in an electric drill into the generator receptacle.

If the drill is reversible, move the direction switch to the forward position.

Start the generator.

While depressing the trigger on the drill, spin the drill chuck in reverse direction. This will excite the field and the generator will now produce electricity. If spinning the chuck one direction does not work, try spinning the chuck in the other direction as you may have the reverse switch positioned backward. (http://www.jencin.com/Fixing.htm)

References