Pan-tilt mechanism research

From Woodland Harvest Wiki
Revision as of 19:38, 6 April 2021 by Lsanten (talk | contribs)
Jump to navigation Jump to search

The individual solar panels have an aspect ratio of 1:2 (62.2 x 31.8 x 1.4 inches).

There is a large variety of solar panel pan-tilt mechanisms. Here you can find a general overview of various solar panel tracker ideas.
SunWize has a large number of solar panel connectors and brackets. Solar Electric has pole mounts.

Linear actuation - potential design one

Taking inspiration from ECO-worthy linear actuator controller

This design does not have a rotational mechanism, but two linear actuators and three hinges. The hinges permit it to tilt in different directions, simulating a rotation.

ECO-worthy mechanism breakdown.png

Linear actuator motion.png

Actuatordesign materials.png

Pros:

  • Linear actuators can resist change in motion i.e. when you power them to a certain position, they will stay there and not consume extra power.
  • Linear actuators are somewhat cheap
  • All materials for this design can be bought locally, like Lowe's
  • Existing template for this design exists. Maximum load with their actuator and trigonometry is 330 lbs, which is more than enough to carry five solar panels. (We don't have to calculate torque)

Cons:

  • Linear actuators don't have encoders, so we would need to attach a position sensor or accelerometer to the motor.

Same linear actuators can be found on Banggood Linear actuators

Rotational actuation - Potential Design Two

Taking inspiration from Simplified Solar Panel Pan-Tilt

This design is cute and can be completed as a benchtop experiment. We would calculate the torque to rotate our mass, and then we would program servo rotation with an Arduino. We would need someone to 3-D print the gears and send them to us.

To tilt the solar panels during the day, we could mount them to a rod and rotate the rod, similar to this mount.

Simplified Pan-Tilt.png

Pros and possibly also cons:

  • We can play around with gear ratios and design to have a super precise movement
  • We have to find motors
  • It would be a massive mechanical display
  • We can use encoders, which would make programming easier in the long run.

Cons:

  • It might require sourcing someone for CNC or lathe use
  • We don't know what issues we might run into scaling up such a design

Wind drag on solar panel plate

The calculation below considers the strongest hurricane wind conditions of around 18 m/s (~40 mph) in North Carolina. We calculated a maximum force of 7835 N (1761.378 lb) on the five solar panels.

drag force on five solar panels at varying angles approximated

F = 1/2 * p * v^2 * A * 2pi * sin(alpha); (p - density of air, v - wind speed, 2pi sin(a) - drag coefficient); density of 10 celsius air - 1.246 kg/m^3;
solar panel dimension - 62.2 x 31.8 x 1.4 inches - 1.58m x 0.8m x 0.0355; area = 1.264 m^2
Lift on all five panels: F = 0.5 * 1.246 kg/m^3 * (17.8 m/s)^2 * 1.264 m^2 * 5 * 2pi * sin(a) <= 7835 N

Encoding a Linear Actuator

There are a couple of ways to attach an encoder to the mount to track actuator position.

Hinges

https://gatehardwarecenter.com/store/d-d-shut-it-bolt-on-baby-badass-hinge-ci3750.html?gclid=CjwKCAjwgZuDBhBTEiwAXNofRIb2o4CEUGVr_-UUNzYSLvvhYg-rvnCTHGrK9NKjKWzOGlotoMQ9GRoCb3gQAvD_BwE

Rotary Encoders

Single Turn Absolute

https://www.mouser.com/ProductDetail/Bourns/AMS22B5A1BHASL334N?qs=kt0%2FcWl7YWfoez7BV%252BGENA%3D%3D&mgh=1&gclid=CjwKCAjw6qqDBhB-EiwACBs6xzts0adWZ6byjvQkTijiDdVFMMXgs5_Tj4s-2xY4Qmdl2MXhLuwLaxoC9RAQAvD_BwE

https://www.mouser.com/ProductDetail/Bourns/AMS22U5A1BHBRL334?qs=Zq5ylnUbLm5JcZY%2FrTiIlQ%3D%3D

IP 56 or higher

SPI: https://p3america.com/ercf-1-05spi-360-z/

Voltage output: https://p3america.com/ercf-1-0505-360-z/

Sun angle calculation

Paper on sun angles matlab function for angles