Revision as of 21:55, 12 October 2020

Please refer to this GitHub Repository for the code for all Arduinos.

Repository Sections

We are currently supplying power to the Arduinos via USB. If we used DC converters from the batteries to the Arduinos, we might save some electricity.

Data logging on SD-card

this randomnerdtutorial.com leads you through SD-card usage with an arduino.

Wireless communication with NRF24L01

We have long-run antennas for wireless communication (NRF24L01 Tutorial).

@@ Line 1: / Line 1: @@
-Please refer to this [GitHub Repository](https://github.com/LSanten/WoodlandHarvestControlSystem) for the code for all arduinos.
+Please refer to this [GitHub Repository](https://github.com/LSanten/WoodlandHarvestControlSystem) for the code for all Arduinos.
+# Repository Sections
+## master-arduino
+## anemometer
+# Opportunities to improve the system
+- We are currently supplying power to the Arduinos via USB. If we used DC converters from the batteries to the Arduinos, we might save some electricity.
+# Useful Guides
+__Data logging on SD-card__
+this [randomnerdtutorial.com](https://randomnerdtutorials.com/guide-to-sd-card-module-with-arduino/) leads you through SD-card usage with an arduino.
+__Wireless communication with NRF24L01__
-We are trying to implement a wireless Arduino-based system that switches on the fridge when the battery voltage is high enough.
 We have [long-run antennas](https://www.amazon.com/gp/product/B06WLH4ZG6/ref=ppx_yo_dt_b_asin_image_o06_s00?ie=UTF8&psc=1) for wireless communication ([NRF24L01 Tutorial](https://howtomechatronics.com/tutorials/arduino/arduino-wireless-communication-nrf24l01-tutorial/)).