Changes

If Start the drill is reversible, move generator. Check the direction switch to the forward positioncircuit breakers. Reset them if they are tripped.

While depressing Insert the trigger on steel rod into the chuck of the corded drill, spin . Tighten the chuck. Step 3 Insert the other end of the steel rod into the cordless drill . Tighten the chuck in reverse direction. This will excite  Step 4 Plug the field and corded drill into the generator will now produce electricity. If spinning Make sure both drills are set for forward (clockwise as viewed from the handle) rotation. Step 5 Hold both drills tightly. Press the trigger switch of the corded drill. Step 6 Press the chuck one direction does not worktrigger switch of the cordless drill, try spinning so that it spins the chuck in of the other direction corded drill. The corded drill acts as you may have a small generator to feed current into the windings of the larger generator to magnetize the reverse switch positioned backwardfield and force it to start working. (http://wwwWhen this happens, the corded drill will start fighting against the cordless drill.jencin.com/Fixing.htm)